Home Forums Explore Media Oil Painting Painting on masonite (hardbard)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #1547878
    Gooddog01
    Default

        Should I add supports on a 14 X 24 inch masonite panel?

        #1548026
        Gribbey
        Default

            I don’t for that size. I usually have 1/4 inch thickness. Anyway, it will need a frame to hang, so then it’s not likely to warp.

            C&C welcome
            "If you go out in the woods today, you're in for a big surprise!" Jimmy Kennedy

            #1548034
            Gooddog01
            Default

                Ok thank you.  I was just wanted to be sure.  But that said, I’m not positive masonite come in 1/4″.  Have to. search

                #1548110
                ilya K
                Default

                    I have two 100×70 cm works on 4 mm MDF, which is much larger and much thinner than what you have. Framed, but no braces or additional supports. 1-2 years, hanging strictly vertically, no signs of any warping, at least not what I can see.

                    Ilya K
                    C&C always welcome

                  Viewing 4 posts - 1 through 4 (of 4 total)
                  • You must be logged in to reply to this topic.