Home Forums Explore Media Watermedia All About Ampersand Aquabord

Viewing 15 posts - 1 through 15 (of 70 total)
  • Author
    Posts
  • #987331
    HarvestMoon
    Default

        I have to say I am totally and absolutely in LOVE with Aquabord (the great board mounted surface formerly known as Claybord Textured)…. and thought that perhaps we could gather together here to discuss what we like or don’t like about it….so far I don’t know much that I don’t like about it. And perhaps some tips.

        You can frame your paintings much cheaper. The reason is that it is a stiff, fairly thick white textured board that can be popped straight into a oil-type painting frame. No glass is needed. No matting is needed. Yes, the aquabord is more expensive than paper, but you make up for that in framing, and the resulting COLORS from your work shines through.

        No glass means your work can be seen in all it’s richness of color- no glare- and no broken glass if someone knocks your painting off the wall either.

        I have used Aquabord with gouache, fluid acrylics, and a bit with watercolor. The only difference I really find in the surface is that perhaps the paint and water dries up a bit quicker.

        Colors can be lifted off of the surface very easily. In fact, I stuck an entire bord under the facet and pretty much washed and rubbed off most of the paint and was able to use the bord again with gouache.

        I spray the finished surface with krylon clear acrylic. I found out that you need to spray a finish on when there is NO humidity in the air or it can get cloudy. The cloudy stuff will eventually dry- or if you add MORE fixitive it seems to get better….so spray it outside when it is hot and dry (which it is here 364 days of the year- I chose that ONE humid day the other day to spray- oops).

        I love the fact that the bords are perfectly flat. No amount of water is going to make your painting wrinkle or whatever. No stretching is needed.

        Please feel free to add your tips….

        Has anyone tried the SMOOTH bord that is intended for acrylics and oils with gouche? Jerry’s store had a giant sale on it….

        ok, so I guess I don’t like the fact that I have a LOT of watercolor paper and now just want to paint on these bords….

        Harvest Moon 🐐

        #1105078
        bejause
        Default

            Hi Linda, I tried the aquaboard once and loved it as well. I have bought a couple more and am waiting till the right time to use them. The larger size is about 25.00 each here. That and the quick drying time (hard for large wet on wet areas ) are the only downfalls I experienced. Otherwise I agree with all of the good points you mentioned. I really understand what you mean about not wanting to use paper anymore!

            Pamela
            [FONT=Franklin Gothic Medium]"I never fall apart because I never fall together!" Andy Warhol
            [FONT=Franklin Gothic Medium]http://bejause.blogspot.com
            http://www.flickr.com/photos/pamelapayne/

            #1105046
            HarvestMoon
            Default

                Pamela- our local Jerry’s yesterday had a huge number of the panels- the museum sort- with edges you can paint on…the shallow ones- 12 X 12 were about $5.99 I think….they are not aquabord but the sort for oils and acrylics- I am going to try those though for that price….but they are made in Austin…I don’t know if they ship them to their NC warehouse then back to Austin or if they go directly to Austin from Austin (which makes more sense to me with the gas thingy)

                Harvest Moon 🐐

                #1105041
                Carey Griffel
                Default

                    Linda, these informative threads are so, well, informative! :D

                    I’ve never tried this surface myself, but now you’ve got me wondering about it. Thanks for the tips!

                    ~!Carey

                    * Zaney Zebras (blog) * facebook art page * facebook floral design page * Recipe Blog *
                    "...I wished to live deliberately...and not, when I came to die, discover that I have not lived." ---Henry David Thoreau

                    #1105045
                    deb9654
                    Default

                        Linda, I’m loving the Aquabord too! And just started with the smoother Claybord and loving it as well. So far I’ve used them with watercolor, fluid acrylics and acrylic ink. I like all 3 and don’t really have a favorite at this point. I’ve been using mostly the 5×7 or 6×6 but got some 12×12, some cradled, 9×12, 11×14, 18×24, and even a cradled 22×30! Haven’t touched any of them yet except the 9×12.

                        I would suggest to be careful who you order the larger ones from. I’ve ordered them from Dick Blick and Jerry’s. The ones from Dick Blick were packaged just fine but the last order from Jerry’s was a mess. I ended up with a damaged cradled 22×30, cradled 12×12 and 18×24….over $50 worth. Jerry’s customer service is not great. It took me 5 days to get it straightened out and that was only because when I called back, yet again, I pretended that I was placing an order so I could get a live person. It was more than frustrating. They finally credited me for the damaged ones and didn’t want them back. They do need to be packaged securely with the corners protected.

                        I’m wanting to use them more than paper too! Thanks for the info on it clouding up with the humidity. I have several to be varnished but held off until I got some sealer…recommended on the Golden website (a wealth of info there). It just came yesterday so we’ll see if I can do it this weekend or not. I’m in Hudson Valley in New York and humidity is our middle name so I may have to wait.

                        #1105047
                        HarvestMoon
                        Default

                            Thanks Carey- don’t know if these have made it across the pond yet…

                            Deb- I have ordered a bunch from dickblick….they have all been fine- but it is funny because blick’s really does not put any sort of padding in most of the time- they stick in a few air pillows….while the stuff I have gotten from jerry’s has been packed well…but I never ordered the aquabords from them either….and boy do they stick you for shipping, so guess they can afford to pack well….if my husband sees another box from either arrive he will likely pop a gasket….. I have found the little sizes- the little packs that contain several- at Hobby Lobby too…the little ones are great for trying them out to see if you like them

                            I am happy to hear that you have had luck with the Claybord as well….

                            Harvest Moon 🐐

                            #1105026
                            Starsprite
                            Default

                                Linda….as you know…I am working on a huge 22″ x 30″ Flat 3/8″ panel Ampersand aquabord textured, Tuscany painting for my sister Debbi. I bought some Krylon Matte Finish to spray over it when done. Do I need to varnish it also after that?? If so, what kind??

                                Also, my main question is what do you attach to the back of the clayboard to hang it, if you don’t want to frame it? It’s a picture of a big open window looking out onto a Tuscany scene and I and I want it to look like it’s a real window on her wall…so didn’t want to use a frame.

                                Thanks!!

                                [FONT="Lucida Sans Unicode"]~Patty~

                                #1105048
                                HarvestMoon
                                Default

                                    Sprite- several coats of the Krylon Matte Finish should work like a charm….

                                    I have never tried to hang it without a frame…..the folks at ampersand have been really helpful when I asked them questions…..why not email them for frameless framing tips? Don’t know if those small screws would work that the framers use to attach the loops for a wire or not…or perhaps there is something clear that would clamp to each side somehow and allow a wire?

                                    their email is:
                                    [email][email protected][/email]

                                    Harvest Moon 🐐

                                    #1105075
                                    Monastic Bat
                                    Default

                                        Linda,
                                        You might look into adhering a “Saw Tooth” or some other hanger device to the back of the board with a two part epoxy adhesive. I would do a test on a scrap board first, to see if it will hold.

                                        Regards,
                                        Greg

                                        [FONT=Century Gothic]So when is this "Old enough to know better" supposed to kick in??? :lol:

                                        #1105049
                                        HarvestMoon
                                        Default

                                            Thanks Greg- that just might work for Sprite!

                                            Harvest Moon 🐐

                                            #1105050
                                            HarvestMoon
                                            Default

                                                The aquabord is for sure a much nicer surface for really wet media- I tried to use their value panel- the artist panel- that is really for oil and acrylics….and it is just a bit too smooth for my taste…using gouache that is- but it has a bit of texture and you can draw on it like a dream.

                                                Ampersand has just updated their website….and I notice a section on framing tips- and some of the boards come with nail grooves in them Sprite- check yours….

                                                They also have some neat sounding offers – sample packs to try various bords…

                                                they are at:
                                                http://ampersandart.com/

                                                Harvest Moon 🐐

                                                #1105027
                                                Starsprite
                                                Default

                                                    Nope…no nail grooves and it’s quite heavy..I think I would feel safer hanging it with 2 of the saw tooth devices…..I’ll have to look for 2 part epoxy…never heard if it before.

                                                    I’ll check out the Ampersand site too. I bought the sample pack of claybords, just to try them out…and the claybord tools for scratching into the clayboard. I tried them a little bit on this current piece,but you really can’t tell… I was probably too light with them.

                                                    EDIT:
                                                    Now, from going to the site and reading, I think I should have chosen the cradled boards if I didn’t want to frame it. I think I’m stuck framing it…which I think I can work out…if I can find a frame that big at Michaels..or maybe I can find one on line……hmmmmm.

                                                    [FONT="Lucida Sans Unicode"]~Patty~

                                                    #1105051
                                                    HarvestMoon
                                                    Default

                                                        Sprite- try Hobby Lobby- they have the wooden frames on sale every other week or so for 50% off…if you get a simple looking one, it will look like a window- windows are framed right?

                                                        Harvest Moon 🐐

                                                        #1105028
                                                        Starsprite
                                                        Default

                                                            What size of frame would I need fora 22 x 30 panel? That size or bigger??

                                                            [FONT="Lucida Sans Unicode"]~Patty~

                                                            #1105052
                                                            HarvestMoon
                                                            Default

                                                                Sprite- I think the size goes by the picture size- so it would be 22 X 30 if you pop that baby directly into the frame (no matt)….then they have these thick staple like things that they shoot into the frame that hold the bord very securely- then they put a wire on the back…seriously cheap framing if you get the folks at hobby lobby to just tack it in and put on wire- and you pick out a 1/2 off frame

                                                                Harvest Moon 🐐

                                                              Viewing 15 posts - 1 through 15 (of 70 total)
                                                              • You must be logged in to reply to this topic.