Home › Forums › Explore Media › Oil Painting › The Technical Forum › speed drying an oil painting–suggestions?
- This topic has 24 replies, 14 voices, and was last updated 14 years, 3 months ago by Songwind.
-
AuthorPosts
-
January 6, 2010 at 10:54 am #988326
I have a painting that I completed last Saturday for drop-off at a show this Saturday. I’d like to get it touch dry and get a coat of touch-up vanish on it by then. (It is entitled ‘Fish heads’ and was posted a day or two ago)
Any ideas of how I can speed the drying? I have had it pretty close to the wood stove but the white is still pretty soft. I don’t have another painting that fits the theme of this show.
Desperate for ideas!
[FONT=Book Antiqua]Ian , the [FONT=Arial]hopeful aspirer.
Any C&C I may make is based on the theory that even the act of disagreeing with one of my lousy suggestions may still spark an inspired idea.January 6, 2010 at 11:01 am #1130552Heat doesn’t “dry” oil paint; oil paints don’t actualy “dry”. They oxidize (for want of a better word, they rust…)
I’m not as familiar with the actual chemistry of this process as I hope to be someday, but I don’t think there’s anything you can do to hasten the process.
Forcing the waveform to collapse for two decades...
http://www.syntheticskystudios.com
Hilliard Gallery, Kansas City, "Small Works", December 2019January 6, 2010 at 11:06 am #1130565If it was me, I would get out my little, portable, and
very hot hair dryer and go to work on that painting.
It’s a great source of high volumn hot air…artArtie
AJC DESIGN STUDIOSJanuary 6, 2010 at 11:06 am #1130561It should be touch dry by then. A warm area will help. Put it near (not on top of!) a heater/radiator.
Lady Mars Orange Marmalade Stapleford
Moderator: OIls, Pastels, Plein Air
Be yourself. Everyone else is already taken. -Oscar Wilde
January 6, 2010 at 11:11 am #1130553OK, stapeliad and artc are claiming that heat will hasten the paint’s oxidation.
Can anyone explain 1) if this really will work, and 2) how it works, if it does?
Thanks!
Forcing the waveform to collapse for two decades...
http://www.syntheticskystudios.com
Hilliard Gallery, Kansas City, "Small Works", December 2019January 6, 2010 at 11:22 am #1130567[COLOR=”Teal]OK, stapeliad and artc are claiming that heat will hasten the paint’s oxidation.
Can anyone explain 1) if this really will work, and 2) how it works, if it does?
Thanks![/COLOR]
Heat will increase the speed of reaction. More energy in the air will increase the chances of oxygen molecules hitting the paint and reacting. Increasing the amount of oxygen in the air or increasing air pressure would speed the process too, so even a cold fan will help.
Mark
Website: www.marksheeky.com
Twitter: @marksheekyJanuary 6, 2010 at 11:50 am #1130554Heat will increase the speed of reaction. More energy in the air will increase the chances of oxygen molecules hitting the paint and reacting. Increasing the amount of oxygen in the air or increasing air pressure would speed the process too, so even a cold fan will help.
Mark
Thanks.Using a fan makes more sense to me than heat. Didn’t Leonardo have a painting melt right off of a wall, from too much heat?
Forcing the waveform to collapse for two decades...
http://www.syntheticskystudios.com
Hilliard Gallery, Kansas City, "Small Works", December 2019January 6, 2010 at 11:58 am #1130562You don’t want intense direct heat. Just a warm area.
My easel is by the heater, and when the heat is on my paintings dry much faster…which is annoying because sometimes I’d like more “open” time. And the palette dries too.
I just finished a painting which kept drying overnight (and the palette too)…because the heat was on. Usually I can keep a palette out for at least 3, 4 days and my paintings are not touch dry overnight.
Lady Mars Orange Marmalade Stapleford
Moderator: OIls, Pastels, Plein Air
Be yourself. Everyone else is already taken. -Oscar Wilde
January 6, 2010 at 12:11 pm #1130566AnonymousFreezing will slow oxidation to a crawl. Cold will slow it considerably. Room temp about 70F, average drying, warm like about 100F will accelerate it but it still takes time. Too much heat can be detrimental can’t say exact temp though, I assume that it can alter the process of oxidation/polymerization in a negative way.
Bottom line, warmth and time, your only option at this point.
I have old hot water radiators and if I want quicker drying I place them above one. In the summer I leave them in a warm car. I would not even consider holding a hair dryer on them because the time frame for proper drying still will be in the few days range. Quick drying colors like burnt umber, maybe a day or so to touch but dry to touch is not thoroughly dry either.January 6, 2010 at 12:24 pm #1130569[COLOR=Teal]
Thanks.Using a fan makes more sense to me than heat. Didn’t Leonardo have a painting melt right off of a wall, from too much heat?[/COLOR]
I think you thinking of the last supper. But it is causes by an improper fresco technique, among other issues.
[FONT=Arial, Helvetica, sans-serif]
January 6, 2010 at 2:27 pm #1130563Thank you for the suggestions, everyone. I don’t usually pay much attention to how long my paintings take to dry–it always seems quick enough. This is the first time that I had such a tight deadline.
My house is not overly warm and gets quite chilly by morning (I have a small wood stove), and gets quite chilly again by the time I get home from work.
I guess I need to replicate the conditions within a closed up car on a hot day in Arizona! Perhaps an electric heater with a fan. I will try borrow one.
[FONT=Book Antiqua]Ian , the [FONT=Arial]hopeful aspirer.
Any C&C I may make is based on the theory that even the act of disagreeing with one of my lousy suggestions may still spark an inspired idea.January 6, 2010 at 3:52 pm #1130575all paints drying times are influenced by cold / heat / humidity cold paint will dry slower hot quicker
drying will also be influenced by how porus a surface it is used on / how much it is diluted and depending on the medium it is diluted with
liquin speeds up drying but can have undesired reactions other mediums will slow drying
a friend from another forum has built a closed drying cabinet with steady warm airflow
when it’s cold i put mine on top of the radiator to get gentle rising heat
this seems to narrow drying times considerably
unsure they totaly dry by oxidisation a good percentage has to be carrier medium evaporation the smell you get from the paint and mediums will be from them gradualy evaporating !!
[FONT=Fixedsys]if at first you don't succede !!!![/COLOR]
[FONT=Fixedsys]
[FONT=Fixedsys]give skydiving a miss !![/COLOR]January 6, 2010 at 4:01 pm #1130570I put one of my paintings in front of the heater for a day once, it seemed to work, but the paint was also pretty thin.
-Sharon Schock
www.sharonschock.etsy.com
www.sharonschock.comJanuary 6, 2010 at 7:59 pm #1130568Heat and light both help, I would shine an incandescent light on it.
January 7, 2010 at 12:33 am #1130571Neither heat nor air will help with a thick over thin application of oils. Each depth has to dry at its own rate. If oxidation doesn’t occur naturally, with time as the only ingredient, you would risk having the person who may buy the painting return it to you in a couple of years time to ask why it’s cracking and crazing. It might be risk to hasten drying within a week, but if it’s not drying on its own, you might consider entering something else this time instead. (Even if it didn’t sell and you brought it back, you would be losing a painting to cracks).
Nancy http://nancyparkfineart.com
All human beings are dream beings. Dreaming ties all mankind together. - Jack Kerouac -
AuthorPosts
- The topic ‘speed drying an oil painting–suggestions?’ is closed to new replies.
Register For This Site
A password will be e-mailed to you.
Search