Home › Forums › Explore Media › Glass Art › Let’s Talk › Glass Technical Forum › mailbox annealer
- This topic has 146 replies, 63 voices, and was last updated 6 years, 5 months ago by jl mcquade.
-
AuthorPosts
-
January 23, 2004 at 9:46 pm #983895
well i started a project today, that i promiced i would post here. i am building an annealing kiln. it will be made inside a large rural mail box. it will have a fire brick floor to add some thermal mass, and a frax dome. i am building the heater in the end of the kiln. the fire bricks will help to keep the temperature uniform. the inside area will be 0.8 cubic feet with a 9x9x21 inch interior. it will have 1200 watts and pull 10 amps at 120v. here is a photo of it. i will be working on it over the next few weeks, so it won’t be finished for a while. i will keep track of the cost but it will probably be about $75 to $100.
January 23, 2004 at 10:02 pm #1022349i found a box of these at a local surplus store. they were $1.95 each. it is labeled 4800 Watts at 240V, so i figure it will be 1200 Watts at 120V. unfortunately, i have already sent out most of the elements to some glassblowers. you could use a electric stove cooking range element instead and they only cost a few dollars.
January 23, 2004 at 10:07 pm #1022412Mark,
This is a very interesting thread and I am interested in hearing more. I have a mailbox annealer and really like it, so I would love to see how it was made and see about making my own one day.More, more, more!Thanks for showing.
Stefanie
Etsyhttp://phishstuff.etsy.com
PhishStuff by Stefwww.phishstuff.comJanuary 23, 2004 at 11:15 pm #1022423Great Mark! Keep us posted on this tutorial. Even though I may not build one I find these tutorials of yours interesting. Amazes me the knowledge and things you come up with.
Will be looking forward to the progress!
January 24, 2004 at 4:02 am #1022393I just love your tutorial’s Mike and I’m really excited about this one. Cant wait to see more.
n
Natasha
Neatobeado.comJanuary 24, 2004 at 6:56 am #1022433Fantastic idea. After seeing the cost to ship a 100lb kiln from the US, I was wondering how hard it would be to build one! May I ask some general design questions?
Do you glue the firebricks to each other, and with what? Is a complete metal shell necessary for safety?
And would the fiber stuff serve to reduce electricity usage in a taller kiln that might not always be used to its full height? Sometimes beads, sometimes two-foot-tall sculptures, to name an extreme spread. Assuming one were to switch off upper-level heating elements before stuffing the fiber in.
My grandmother had a kiln (for ceramics) that had stackable rings — need more height, add a ring and plug it in. This was twenty or thirty years ago. I don’t know if the design would be suitable for glass, since I am sure glass needs higher temperatures than ceramics.
What a great project!
January 24, 2004 at 7:53 am #1022350I just love your tutorial’s Mike and I’m really excited about this one. Cant wait to see more.
n
the name is mark!!!!!
January 24, 2004 at 10:50 am #1022392lol,
Mark, that was maybe a Freudian slip on Puffers part…….since Mike Crowley of the GlassHive uses mailboxes to create his annealers….I’m glad your posting the steps on making yours, I’m interested in seeing how they go from start to finish….I love the one I have and wouldn’t hesitate to replace with the same….when/if mine should ever die!
At your estimated cost total, your not putting a digi controller …I just couldn’t do without mine….after years of “hand ramping” those fujis are worth their weight in gold.
Thanks for sharing, I look forward to the next installment in the “Mark’s amazing kiln” story.
Catharine"I'm always in trouble for saying the things that other people are only THINKING...I suspect that is because their lips are full of botox!" ~ C Weaver 2005
February 28, 2004 at 11:00 pm #1022351ok i finished it today. i only took a couple of hours to build. i lined the inside with steel and it has a brick floor to hold heat. the heater is in the back end of the kiln. the total cost is about $100 for a 16x8x8 inside diameter annealing kiln. it will have an external temperature controller. i am going to post some photos detailing its construction.
February 28, 2004 at 11:01 pm #1022352February 28, 2004 at 11:10 pm #1022353here are a couple more. one shows the metal lined inside. the floor is brick and the frax insulation is protected by the metal. i have a brick in the end to protect the elements. the floor is 3 bricks long or 13.5 inches. you still have another 3 inches in length because of the brick in the end.
February 29, 2004 at 9:50 am #1022431That is awsome! What are your plans for a pyrometer and a infinate control switch? I want a mailbox annealer!
February 29, 2004 at 12:01 pm #1022418Hi Mark, do you know how long it takes to get to say 950 degrees F ? How hot will it get ?
Let us know when you find out.Thanks for all the information.
Lonnie
February 29, 2004 at 5:01 pm #1022394OH Mark, I’m so sorry that I called you Mike, it was an absolute slip of the fingers without realizing it. I love following your posts and tutorials. (I feel so bad cause I know I hate it when someone calls me by another name)
Anyway, What an excellent job you did on this kiln, I’m going to have to make one of these ASAP just so I know I can
Thank you Mark for sharing!!!
Natasha
Natasha
Neatobeado.comFebruary 29, 2004 at 6:40 pm #1022354Hi Mark, do you know how long it takes to get to say 950 degrees F ? How hot will it get ?
Let us know when you find out.Thanks for all the information.
Lonnie
hi lonnie,
it took about 40 minutes to heat up to 950F, but it took one hour for the temperature to stabilize. i just pluged it into my temperature controller about 1 hour a ago, and it is at 950 stable to within 1 or 2 degrees. i think that my use of brick for the floor and around the heater, adds thermal mass that helps to stabilize the temperature as well. i really like having the inside lined with steel. it helps to keep frax off your art and out of the air. i sprayed the end of the kiln with frax rigidzer, collidial silica. i think this kiln could go much higher in temperature, but i wanted an annealer thats all. i can put my hand on the outside of the kiln when its at temperature, so it is pretty well insulated. the 3 bolts through the door to hold on the fiberboard door get real hot. i am going to have to figure out a solution for that. -
AuthorPosts
- The topic ‘mailbox annealer’ is closed to new replies.
Register For This Site
A password will be e-mailed to you.
Search