WetCanvas
Home Member Services Content Areas Tools Info Center WC Partners Shop Help
Channels:
Search for:
in:

Welcome to the WetCanvas forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please visit our help center.

Go Back   WetCanvas > Explore Media > Printmaking
User Name
Password
Register Mark Forums Read

Salute to our Partners
WC! Sponsors

Our Sponsors
Reply  
 
Thread Tools Display Modes
  #1   Report Bad Post  
Old 05-05-2019, 03:26 PM
Madprintmaker1953 Madprintmaker1953 is offline
New Member
 
Join Date: May 2019
Posts: 2
 
Pronto plate fanatic

Hello this is Madprintmaker
I am new to WC and would love to network with anybody doing pronto or polyester lithography. I have about 1 1/2 years exposure to the process but still working out problems. One, etching ink that gets sticky and causes the plate to close down, whereby I have to use my fingers to rub away ink. Solutions? Thx.
Reply With Quote
  #2   Report Bad Post  
Old 05-09-2019, 07:31 PM
lovestofish lovestofish is offline
Senior Member
 
Join Date: Jan 2009
Posts: 149
 
Re: Pronto plate fanatic

Sounds like your ink is too loose vs. tacky. You might want to add mag to it especially if it is breaking up on you and making little floaties that close your plate. We used to add gum to the water - quite a bit so that the non-image area resists the ink as it absorbs the water during the sponging process. We also used to add toothpaste to the water to act as a scrubbing element to keep the plate clean - no lie. It is akin to some lithographers dumping mag and gum arabic in their sponge water to make a very basic fountain solution. Yes, the plates smelled nice and minty. The toothpaste has to be paste and not gel - the little grits acts as an abrasive. You can clean your plate while you are inking it up. Sounds squirrelly but it works. I learned this method at Tamarind. Somewhere between playing with the gum water mixture and adding toothpaste and having a dedicated cleaning sponge you may find some success. We made color separation editions with punch hole registration - the images were color separated and the toner was fused onto each plate that had a primary color. I have no idea of who came up with this approach but like in printmaking - you will get another answer from somebody else. I taught pronto plate printmaking as a graduate assistant. The kids got a kick out of putting toothpaste in the sponge water.
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:44 AM.


© 2014 F+W All rights reserved.