WetCanvas
Home Member Services Content Areas Tools Info Center WC Partners Shop Help
Channels:
Search for:
in:

Welcome to the WetCanvas forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please visit our help center.

Go Back   WetCanvas > Explore Media > Sculpture > Partner: Skratchworks ~ Make It From Skratch
User Name
Password
Register Mark Forums Read

Salute to our Partners
WC! Sponsors

Our Sponsors
Reply  
 
Thread Tools Display Modes
  #1   Report Bad Post  
Old 12-30-2019, 06:41 AM
notaverygoodartist notaverygoodartist is offline
New Member
 
Join Date: Dec 2019
Posts: 2
 
Sculptural Material for Panel Paintings?

I want to do heavily relieved, semi-sculpted, "2.5D' paintings. I've done some of this with Golden molding paste on Ampersand panels. I slather the paste on to a depth of 1/8 - 3/16", carve into it with a plastic stick, and overpaint with acrylic.


Golden molding paste does not have the feel I hoped for. It is sticky, and it tends to adhere to the tool more than itself. It cannot be freely molded the way clay can. The working time is very short. When initially applied, it is too liquid to take an impression. As it sets by evaporation, there is a brief time when it can retain detail, before it becomes unworkable.


I've done about 8 "relief paintings" by this method. The material itself enforces an interesting look, but that look is all that is possible. I was originally intrigued by Jean Dubuffet, who made his own material out of turpentine, resins, and various kinds of "dirt." However, these materials are not allowed in the school environment where I work, and I don't think I would like to deal with the health hazards of volatile solvents at home either.


So I'm asking for suggestions: A material is desired with low toxicity, low volatility, with some of the positive working characteristics of modeling clay. Yet it has to be highly paintable. Perhaps another water based material?


One suggestion was plumber's pipe dope. What about the stuff called "Skratch"?
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:00 PM.


© 2014 F+W All rights reserved.