Home › Forums › Explore Media › Pen and Ink › Best Pens for Stippling… Scientific Illustrations
- This topic has 8 replies, 8 voices, and was last updated 16 years, 11 months ago by Catwoman2.
-
AuthorPosts
-
April 19, 2007 at 4:16 pm #986406
I am doing a bit of scientific illustration and it requires very precise stippling. I have Staedtler pens, .05 and .1 but I do not like the way they stipple. They seem to have hooked or bent ends. I also have Microns, 05 AND 02. They produce larger dots. I am working on a scale of 1:1 and many of the objects I am drawing are quite small. Advise on what pens to use for stippling would be appreciated. Thanks
Siempre,
Barbara http://paintingwithpencil.blogspot.comApril 19, 2007 at 5:28 pm #1084380For the last year, I was using Koh-I-Noor rapidograph pens. I love to work in very small details and I was able to achieve that with sizes down to 0.13 and 0.18. Unfortunately, I ended up getting them clogged or broken too often. I know that this was probably do to my own fault, but it was still frustrating.
Just last week, I bought a set of Copic Multiliner SP pens. I was impressed at how small the nibs were, down to 0.03. With them, I can draw very fine lines without worrying about clogging problems.
I have tried both Staedtler and Microns, but in my opinion, for small details, Copic Multiliner SP beats them all.
Hope this helps.
Nick Bab Arts on InstagramApril 19, 2007 at 5:28 pm #1084381You know, even though I can’t stand them that much, nothing beats a rapidograph for stippling. It gives you consistent sized dots at very small sizes (I would recommend a 3×0 for scientific illustration). They aren’t cheap, but if you take care of them you wont have to buy another pen.
Visit my gallery at www.justsomedude86.deviantart.com to get an idea of what I do
April 19, 2007 at 7:29 pm #1084379I like the Micron 005 size, you can get a nice fine stipple out of those without much trouble, if you don’t want to spring for a rapidograph set.
— Kels
Get that squishy feeling at Xeno's Paradise!
April 20, 2007 at 2:49 am #1084376I use nothing but a .3 (00) Koh-i-Noor rapidograph and I work very detailed. The problem of clogging occurs more with the smaller sizes. I leave my “00” sit for weeks at a time and I have no problems. A lot of folks seem to have clogging problems and after talking to them, I’ve come to the conclusion that I don’t have the same clogging issues because I don’t store the pen upright in a cup. I lay it flat on my table. Also I never lay it down without first putting the cap on, even if it’s only for a few minute break.
Dave........."My pursuit of perfection is not intended to lead me to perfection, but to simply get me as far away as possible from imperfection."
My Website[/URL]..........How to Produce (and Sell) Prints of your Artwork..........My Foliage TutorialsApril 20, 2007 at 9:53 am #1084374I would also recommend the Multiliner SPs. They’re much cheaper to replace if they get clogged, too.
New Users: Beginner's Guide to WetCanvas! ***How to Post Images *** How to Edit Your Profile *** How to Search the Forums *** Guide to the Forums *** Learn about the Virtual Gallery Manager
April 20, 2007 at 12:42 pm #1084378I like the rapidograph or a rotring also, for detail they can’t be beat. I use a 6×0. Unfortunately, they clog or break and the tips cost almost as much as a new pen! I recently tried the Copic Multiliner (“new sketch with copic multiline pens” in this forum) and while not quite as precise as the rotring, they are much cheaper to replace!
And Dave, I lay mine flat and always cap them even if I’m just going to get a cup of tea, but they still clog and/or break that darned little fine wire! I just can’t afford to keep them in new tips!
smoki
April 20, 2007 at 1:15 pm #1084375I like the rapidograph or a rotring also, for detail they can’t be beat. I use a 6×0. Unfortunately, they clog or break and the tips cost almost as much as a new pen! I just can’t afford to keep them in new tips!
smoki
Amen Smoki!!
yeah, i have done years of technical drawing (drafting) and Rapidographs were really the only way to go in my book, but yeah, beware of the 6×0, they are heart breaking little twirps.
BobThe only thing that surprises me anymore, is that I can still be surprised:D
April 20, 2007 at 2:56 pm #1084377And Dave, I lay mine flat and always cap them even if I’m just going to get a cup of tea, but they still clog and/or break that darned little fine wire!
That’s why I only go as small as a “00”! I don’t use those teeny weeny points; I find that I can get smaller or larger dots with my 00 depending on how much pressure I apply. A light touch makes a mighty small dot! Any smaller and I’d think I was erasing!
Dave........."My pursuit of perfection is not intended to lead me to perfection, but to simply get me as far away as possible from imperfection."
My Website[/URL]..........How to Produce (and Sell) Prints of your Artwork..........My Foliage Tutorials -
AuthorPosts
- You must be logged in to reply to this topic.
Register For This Site
A password will be e-mailed to you.
Search