WetCanvas
Home Member Services Content Areas Tools Info Center WC Partners Shop Help
Channels:
Search for:
in:

Welcome to the WetCanvas forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please visit our help center.

Go Back   WetCanvas > Explore Media > Printmaking
User Name
Password
Register Mark Forums Read

Salute to our Partners
WC! Sponsors

Our Sponsors
Reply  
 
Thread Tools Display Modes
  #1   Report Bad Post  
Old 04-05-2019, 10:31 AM
NewToPrint NewToPrint is offline
New Member
 
Join Date: Apr 2019
Posts: 4
 
Newbie asking daft questions

Hello
Iíve recently started printmaking. (I was very fortunate to have found an etching press that needed a new home).
I have successfully produced work in a workshop and produced good prints from Lino cuts. However, when I try and print using various inked up plates with stencils, the paper either slips or gets stuck on the plate and tears. I also seem to not have a enough ink applied. (Should I be using an ink extender..?)
I use damp paper and Intaglio oil based inks. Does anyone have any ideas why this might happen? Many thanks in advance!
Reply With Quote
  #2   Report Bad Post  
Old 04-09-2019, 01:49 PM
contumacious contumacious is online now
Lord of the Arts
 
Join Date: Dec 2016
Posts: 2,656
 
Re: Newbie asking daft questions

Something isn't right if your paper is tearing when you lift the print. Are you doing block prints or something else? Some things to try.
  • Add some modifiers to your ink so it isn't as sticky.
  • Try a different ink.
  • Use heavier paper.
  • Let the paper dry out a bit more before printing.
Reply With Quote
  #3   Report Bad Post  
Old 04-12-2019, 12:50 PM
blackandwhite blackandwhite is offline
Senior Member
 
Join Date: Aug 2017
Posts: 104
 
Re: Newbie asking daft questions

Less pressure could also work to the tearing paper issue, if the printing is done with a press. If printing is done with baren, then I would use sheet of parchment paper (baking paper) between baren and the paper. It will reduce friction that can damage the damp paper.
Reply With Quote
  #4   Report Bad Post  
Old 05-16-2019, 02:04 PM
NewToPrint NewToPrint is offline
New Member
 
Join Date: Apr 2019
Posts: 4
 
Re: Newbie asking daft questions

Many thanks. Iíll check these points and see what happens!
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:52 AM.


© 2014 F+W All rights reserved.