PDA

View Full Version : Will Ferrel Pencil Drawing


Breetheartist
08-22-2012, 03:43 PM
http://www.wetcanvas.com/Community/images/22-Aug-2012/978191-DSC05664.JPG I don't really have any specific critique requests, just if you see anything that you feel would be helpful,
Thanks

Andrewcody
08-22-2012, 08:03 PM
Without a reference photo is is difficult to comment Bree
Regards
Andrew

La_
08-23-2012, 02:27 AM
do you plan to add shadows?

la

Andrewcody
08-23-2012, 02:47 AM
http://www.wetcanvas.com/Community/images/23-Aug-2012/64395-Will.jpg

I think the nose needs trimmed down

Debzy
08-23-2012, 08:28 AM
Hi Bree! Comparing your drawing with the reference photo shows several differences.I think it would be good for you to put the two together and work out your measurements to get a closer likeness. Also, you have posted a basic line drawing, it would be more realistic if you added some shadows and tonal variations. There is much you can do to improve this, and in order to get a closer likeness it is important to follow the rules of proportion and position of features. Good start, but more work could improve it greatly. Good luck Bree and keep working at it. Cheers =)) Debs.

Breetheartist
08-23-2012, 10:45 AM
http://www.wetcanvas.com/Community/images/22-Aug-2012/978191-DSC05666.JPG http://www.wetcanvas.com/Community/images/23-Aug-2012/978191-DSC05663.JPG

Here is the Reference photo and an update on how it is going.
Sorry I should have been more specific about the drawing, the first picture is just a sketch of where all the features should be I will be shading don't worry.
So far I have only used a 4H pencil. :)

Breetheartist
08-23-2012, 09:05 PM
http://www.wetcanvas.com/Community/images/23-Aug-2012/978191-DSC05668.JPG

Debzy
08-23-2012, 09:08 PM
This is definitely more along the track now Bree! Big improvement! Keep going and don't forget to vary the tones, it is all a little midtone at present, but keep going, get the hair in and add some darks, coming along nicely now. Cheers =)) Debs.

philbe123
11-26-2012, 05:23 PM
don't be afraid to use the rubber as a drawing tool. look at the light areas of will's face and draw them out with the rubber then soften the edges carefully so they don't look too hard. :)